{"product_id":"b-c-lightweight-starters-for-continental-certified","title":"B \u0026 C Lightweight Starters For Continental - Certified","description":"This starter for the Continental 0-200 or 0-240 engine solves all the problems that other starters have had -- worn out clutches, cracked pinion gears, hard to find parts. In addition, the BC320 is 4.3 to 5.2 lbs. lighter depending on whether you are replacing a key-type starter or a pull-cable type starter. BC320 starter is STCd for use in certificated aircraft and is available with, or without, the STC. Also available are 2 installation kits; one for replacing a key-type starter, the other for replacing a pull-cable type starter. If you are replacing a key-type starter, you will need installation kit 07-06752. Before installing the BC320, a needle bearing will need to be removed from your engine. To aid in removing this needle bearing, you may purchase Bearing removal kit, 07-06753. If you are replacing a pull-cable starter, you will need installation kit 07-06754. Attention: Before installing the BC320, you will need to cut off a steel shaft that is installed in your engine case. The BC320 starter is a complete starter, ready to install, that will replace the existing motor, clutch, and pinion-gear. Tested by Continental with over 5000 start cycles without a problem. Recommended by Rutan Aircraft Factory. Except for paperwork, there are no differences between STCd starters and starters for homebuilts. A starter must be ordered to match your battery voltage.","brand":"Bad Elf","offers":[{"title":"Default Title","offer_id":48009500786905,"sku":null,"price":1495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0016\/5327\/6707\/files\/BC320.jpg?v=1771260919","url":"https:\/\/www.aloinfousa.com\/products\/b-c-lightweight-starters-for-continental-certified","provider":"aloinfousa.com","version":"1.0","type":"link"}