[properties]
| Properties |
Cisco AIR-PWRINJ7 Power Injector |
| Description |
The Cisco Multigigabit 802.3bt Power Injector is a reliable, standards-compliant power injector capable of powering the latest high-performance access points and other network devices. |
| Product Family |
Cisco Multigigabit 802.3bt Power Injector |
| Product Type |
Power Injector |
[/properties] [specifications]
| Specifications |
Cisco AIR-PWRINJ7 Power Injector |
| Nominal Input Voltage |
100 ~ 240Vac |
| Input Voltage Range |
90 ~ 264Vac |
| Nominal Input Frequency |
50 ~ 60Hz |
| Input Frequency Range |
47 ~ 63Hz |
| Input Current |
2.0A Maximum |
| Average Efficiency |
(@115Vac / 60Hz >88% (on board
(@230Vac / 50Hz >89% (on board |
| No-Load Power Consumption |
(@115Vac / 60Hz <0.21W
(@230Vac / 50Hz <0.15W |
| Rated Output Voltage |
56Vdc |
| Output Voltage Range |
54 ~ 57Vdc (on board |
| Output Current |
0 ~ 1.161A |
| Leakage Current |
<250uA at 264 Vac |
| Insulation Resistance |
DC 500V 10M ohm minimum |
| Overvoltage |
Auto-Recovery |
| Overload / Overcurrent |
Auto-Recovery |
| Over Temperature |
Auto-Recovery |
| Short Circuit |
Auto-Recovery |
| Interfaces |
Data Input 1 x 10/100/1000/2500/5000 BASE-T autosensing (RJ-45
Data+Power Output (PoE: 1 x 10/100/1000/2500/5000 BASE-T autosensing
(RJ-45
AC power input: C14 type socket |
| Indicators |
Two Status LED indicate input power and PoE status |
| Dimensions (W x L x H |
(without cables: 2.6 x 5.5 x 1.5 in (65 x 140 x 38.5 mm |
| Weight |
0.5 lbs. (1.1 kg |
| Environmental |
● Operating
◦ Temperature: 14° to 104°F (–10° to 40°C
◦ Humidity: 5% to 95% (noncondensing
◦ Maximum altitude: 10,000 ft (3,048 m
● Nonoperating (storage and transportation
◦ Temperature: –13° to 149°F (–25° to 65°C
◦ Humidity: 5% to 90% (noncondensing
◦ Maximum altitude: 15,000 ft (4500 m @ 77°F (25°C |
| Compliance |
● IEC 61000-4-2, +/– 6kV
● IEC 61000-4-3, 3V/m, 80%am, 1kHz, 80MHz to 1GHz Criterion A
● IEC 61000-4-4. +/–1kV on input, Criterion B
● IEC 61000-4-5 (lightning surge, AC Input port, 1.2/50 μs / 8/20 μs combination wave,
+/–6kV from line to line,+/–6kV line to earth, Generator impedance：2ohm; Criterion B
● EN55204 (lightning surge, RJ45 port, 10/700 μs wave +/–2kV all lines to earth
● IEC-61000-4-6 (conducted immunity, 3V, 80%AM, 1kHz, 150 kHz–80MHz; Criterion A
● CISPR 32/EN55032 Class B FCC Part 15 Class B
● Safety UL, CE, CCC, IEC/UL/EN 62368 |
[/specifications] [accesories] [/accesories]
Cisco AIR-PWRINJ7 Power Injector
The Cisco Multigigabit 802.3bt Power Injector is a dependable power injector that adheres to industry standards and has the capacity to power modern high-performance access points and various network devices. Access to power is a significant challenge in wireless network design, and the installation of power cables is a considerable cost factor in wireless setups. The Cisco PoE Injector facilitates the simultaneous transmission of data and power to a Cisco access point through a single Ethernet cable. This capability enables the strategic placement of devices to optimize wireless coverage while reducing installation expenses.
Quick Specs:
- 1x 5GbE Ethernet Input Port
- 1x 5GbE Ethernet Output Ports
- Maximum Output Power: 50W
- Compatibility: Cisco Catalyst Access Points
Please see the related tabs for the AIR-PWRINJ7 datasheet.
