| Specifications |
Ruckus ZoneFlex R710 Access Point (901-R710-US00 |
| WI-FI |
| Wi-Fi Standards |
· IEEE 802.11a/b/g/n/ac Wave 2 |
| Supported Rates |
· 802.11ac: 6.5 to 1,733Mbps (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80 · 802.11n: 6.5 Mbps to 600Mbps (MCS0 to MCS31 · 802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6Mbps · 802.11b: 11, 5.5, 2 and 1 Mbps |
| Supported Channels |
· 2.4GHz: 1-13 · 5GHz: 36-64, 100-144, 149-165 |
| MIMO |
· 4x4 SU-MIMO · 4x4 MU-MIMO |
| Spatial Streams |
· 4 streams for SU-MIMO · 3 streams for MU-MIMO |
| Channelization |
· 20, 40, 80MHz |
| Security |
· WPA-PSK, WPA-TKIP, WPA2-Personal, WPA2-Enterprise, WPA3-Personal, WPA3-Enterprise, WPA3, AES, 802.11i, Dynamic PSK · WIPS/WIDS |
| Other Wi-Fi Features |
· WMM, Power Save, Tx Beamforming, LDPC, STBC, 802.11r/k/v · Hotspot · Hotspot 2.0 · Captive Portal · WISPr |
| RF |
| Antenna Type |
· BeamFlex+ adaptive antennas with polarization diversity · Adaptive antenna that provides 4,000+ unique antenna patterns |
| Antenna Gain (max |
· Up to 3dBi |
Peak Transmit Power (aggregate across MIMO chains |
· 2.4GHz: 28dBm · 5GHz: 28dBm |
| Minimum Receive Sensitivity (Rx Sensitivity varies by band, channel width and MCS rate |
-104dBm |
| Frequency Bands |
· ISM (2.4-2.484GHz · U-NII-1 (5.15-5.25GHz · U-NII-2A (5.25-5.35GHz · U-NII-2C (5.47-5.725GHz · U-NII-3 (5.725-5.85GHz |
| 2.4GHZ RECEIVE SENSITIVITY |
| HT20 |
MCS0 : -97 MCS7 : -79 |
| HT40 |
MCS0 : -94 MCS7 : -77 |
| 5GHZ RECEIVE SENSITIVITY |
| VHT20 |
MCS0 : -98 MCS7 : -80 |
| VHT40 |
MCS0 : -94 MCS7 : -77 |
| VHT80 |
MCS0 : -91 MCS7 : -74 |
| 2.4GHZ TX POWER TARGET |
| MCS0 HT20 |
22 |
| MCS7 HT20 |
19 |
| 5GHZ TX POWER TARGET |
| VHT20 |
22 |
| MCS0, VHT40 |
22 |
| MCS7, VHT40, VHT80 |
19 |
| MCS9, VHT40, VHT80 |
16 |
| PERFORMANCE AND CAPACITY |
| Peak PHY Rates |
• 2.4GHz: 600Mbps • 5GHz: 1733Mbps |
| Client Capacity |
• Up to 512 clients per AP |
| SSID |
• Up to 31 per AP |
| RUCKUS RADIO MANAGEMENT |
| Antenna Optimization |
• BeamFlex+ • Polarization Diversity with Maximal Ratio Combining (PD-MRC |
| Wi-Fi Channel Management |
• ChannelFly |
| Client Density Management |
• Band Balancing • Client Load Balancing • Airtime Fairness • Airtime-based WLAN Prioritization |
| SmartCast Quality of Service |
• QoS-based scheduling • Directed Multicast • L2/L3/L4 ACLs |
| Mobility |
• SmartRoam |
| Diagnostic Tools |
• Spectrum Analysis • SpeedFlex |
| NETWORKING |
| Controller Platform Support |
• SmartZone • ZoneDirector • Unleashed* • Standalone
* Refer to Unleashed datasheets for SKU ordering information. |
| Mesh |
• SmartMesh™ wireless meshing technology. Self-healing Mesh |
| IP |
• IPv4, IPv6, dual-stack |
| VLAN |
• 802.1Q (1 per BSSID or dynamic per user based on RADIUS • Port-based |
| 802.1x |
• Authenticator & Supplicant |
| Tunnel |
• L2TP |
| Policy Management Tools |
• Application Recognition and Control • Access Control Lists • Device Fingerprinting |
| PHYSICAL INTERFACES |
| Ethernet |
• Two 1Gbps Ethernet ports • Power over Ethernet (802.3af/at/bt with Category 5/5e/6 cable • Link Aggregation (LACP |
| USB |
• 1 USB 2.0 port, Type A |
| PHYSICAL CHARACTERISTICS |
| Physical Size |
• 22 cm (L, 22 cm (W, 6 cm (H • 8.7in (L x 8.7in (W x 2.4in (H |
| Weight |
• 1.12 kg (2.5 lb |
| Mounting |
• Wall, Drop ceiling, Desk • Secure bracket (sold separately |
| Physical Security |
• Hidden latching mechanism • Kensington Lock Hole • T-bar Torx |
| Operating Temperature |
• -4ºC (-14ºF to 60ºC (140ºF |
| Operating Humidity |
• Up to 95%, non-condensing |
| POWER (Max power varies by country setting, band, and MCS rate |
| 802.3af |
• 2.4GHz: 2x4, 19dBm per chain • 5GHz: 4x4, 20dBm per chain • Functional Limitation: 2nd Ethernet disabled USB disabled |
| 802.3at, PoE+/injector, VDC |
• 2.4GHz: 4x4, 22dBm per chain • 5GHz: 4x4, 20dBm per chain • Functional Limitation: None |
| Max Power Consumption |
• Peak: 25W, including USB loading and 100m cable |
| CERTIFICATIONS AND COMPLIANCE |
| Wi-Fi Alliance* |
• Wi-Fi CERTIFIED™ a, b, g, n, ac • Passpoint®, Vantage |
| Standards Compliance** |
• EN 60950-1 Safety • EN 60601-1-2 Medical • EN 61000-4-2/3/5 Immunity • EN 50121-1 Railway EMC • EN 50121-4 Railway Immunity • IEC 61373 Railway Shock & Vibration • UL 2043 Plenum • EN 62311 Human Safety/RF Exposure • WEEE & RoHS • ISTA 2A Transportation |
*For a complete list of WFA certifications, please see the Wi-Fi Alliance website **For current certification status, please see price list |
| SOFTWARE AND SERVICES |
| Location Based Services |
• SPoT |
| Network Analytics |
• SmartCell Insight (SCI |
| Security and Policy |
• Cloudpath |