Entrega expressa mundial com rastreamento e seguro • Envio dos EUA • Frete grátis
Seguro e protegido • Aceitamos ordens de compra
Suas informações de pagamento são processadas com segurança. Nós não armazenamos dados do cartão de crédito nem temos acesso aos números do seu cartão.
Sem pagamentos adicionais • Sem custos extras
Tarifas, impostos e todas as taxas aplicáveis estão incluídas. A entrega porta a porta é realizada sob o regime de entrega com direitos pagos (DDP). Todos os envios são totalmente rastreados e segurados.
A entrega porta a porta é realizada sob os termos "Delivered Duty Paid" (DDP), com rastreamento completo e seguro.
Gerenciamos todos os procedimentos de importação e desembaraço aduaneiro em todo o mundo. Tarifas, impostos de importação, taxas e encargos aduaneiros estão incluídos para todos os destinos, e nenhum pagamento adicional é necessário.
Descrição
2U rack server
Processor | Max: 56 Cores2x Gen 4 / 5th Gen Intel Xeon Scalable
Memory | Max: 8TB32 ECC DDR5 RDIMM 4800Mhz
Storage | Max: 368.64TBFront bays:
Up to 16x 2.5" SAS/SATA + 8x NVMe
Up to 24x 2.5" SAS/SATA/NVMe (Universal)
Up to 24x 2.5" NVMe (Passive)
Up to 24x 2.5" NVMe (Switched)
Rear bays:
Only supported on the Universal 24x Chassis
Up to 2x 2.5" SAS/SATA/NVMe (HDD/SSD) Max 30.72 TB
Up to 4x 2.5" SAS/SATA/NVMe (HDD/SSD) Max 61.44 TB
Up to 4x 2.5" EDSFF E3.S NVMe SSD
Boot Optimized Server Storage (BOSS-N1) Hot-Swap
Internal USB
S160 (SATA/NVMe SW RAID)
H355i, H755, H755N, H965i, HBA355i, H355e, HBA355e, H965e
2 x 1GE LOM / 25 or 100 GbE x 2 (DPU Must be Installed)
Networking OptionsOCP 3.0 x8 Mezz 3.0
Remote Management:iDRAC9 with Lifecycle Controller
PCIe Slots:Up to 8 x PCIe Gen5 or Gen 4 slots
SNAP Support | Slot 7 SNAPI: 1 x16 Gen5 FH, HL
GPU:Up to 2 x 350 W DW
6 x 75 W SW
12 x 2.5-inch and rear drive configuration systems do not support a GPU card.
- Dell PowerEdge R710
- Dell PowerEdge R720
- Dell PowerEdge R720XD
- Dell PowerEdge R730
- Dell PowerEdge R730XD
- Dell PowerEdge R740
- Dell PowerEdge R740XD
- Dell PowerEdge R740XD2
- Dell PowerEdge R7415
- Dell PowerEdge R7425
- Dell PowerEdge R750
- Dell PowerEdge R750XA
- Dell PowerEdge R750XS
- Dell PowerEdge R7515
- Dell PowerEdge R7525
- Dell PowerEdge R760
- Dell PowerEdge R760XA
- Dell PowerEdge R760XS
- Dell PowerEdge R760XD2
- Dell PowerEdge R7615
- Dell PowerEdge R7625
(Click to View)
Ideal for:
- Artificial Intelligence (AI)
- Data Analytics
- Database
- Machine Learning (ML)
- Virtual Desktop Interface (VDI)
The Dell PowerEdge R760 Built for demanding enterprise workloads, the Dell PowerEdge R760 is a 2U dual-socket rack server engineered to handle AI and machine learning applications with ease. This mainstream server delivers strong, cyber-resilient performance in a design built specifically for modern data center needs.
There is no 16-bay backplane, its actually multiple 8SFF Backplanes.
- 16 x 2.5" (SAS4/SATA) + 8 x 2.5" NVMe Direct
- 24 x 2.5" (SAS4/SATA) with 8 x Universal slots (SAS/SATA HWRAID + NVMe Direct)
- 24 x 2.5" (SAS4/SATA)
- 24 x 2.5" (SAS4/SATA) + 2 x 2.5" (NVMe Direct)
- 24 x 2.5"(SAS4/SATA) + 2 x 2.5" (SAS/SATA)
- 24 x 2.5"(SAS4/SATA) + 4 x 2.5" (SAS/SATA)
- 24 x 2.5" (SAS4/SATA) + 4 x 2.5" (NVMe Direct)
- 24 x 2.5" (SAS4/SATA) - Dual Controller
- 24 x 2.5" + 2 x 2.5" (SAS4/SATA) - Dual Controller
- 24 x 2.5" (SAS4/SATA) with 8 x Universal slots (SAS/SATA HWRAID + NVMe Direct)
- 24 x 2.5" (SAS4/SATA)
- 24 x 2.5" (SAS4/SATA) - Dual Controller
- 24 x 2.5" (SAS4/SATA) with 4 x Universal slots (SAS/SATA HWRAID + NVMe Direct) + 4 x 2.5" (SAS4/SATA)
- 24 x 2.5" (NVMe Gen5 switched)
- 24 x 2.5" (NVMe RAID - Gen5 Switched) - Dual Controller
- 24 x 2.5" (NVMe Gen4 Direct) Passive
There are so many options we had to split them up to make it easier to understand the scale the R760 can perform.
12x 3.5" SAS/SATA
8x 2.5" SAS/SATA/NVMe
8x 2.5" NVMe
8x 2.5" EDSFF E3.S
24x 2.5" SAS/SATA/NVMe
24x 2.5" NVMe Passive
24x 2.5" NVMe SwitchedUp to 2 x 4th Gen Intel® Xeon® Scalable or Intel® Xeon® Max Processors with up to 56 cores
There are three types of heat sinks for this Dell R760 Rack server. The heat sink option is based on the configuration and the TDP of the CPU. Any TPD above 250W will be liquid-cooled.
- STD HSK ≤ 165 W (supports only 2.5-inch drives and non-GPU configuration)
- 2U HPR HSK 165 W–350 W (supports 2.5-inch drives and non-GPU configuration)
- L-type HSK Supports all GPU/FPGA configurations
Any Processors TPD above 250W will need the liquid-cooled system installed.
CPUs 9480, 9470, 8470Q and 6458Q are supported only in liquid cooling configuration.
This Dell Gen16 server offers two cooling paths — air-cooled or Direct Liquid Cooled. Choosing DLC for the CPUs removes the rear VGA port, though it can be relocated to the front or restored at the rear, with the rear option using up a PCIe slot.
All GPU/FGPA cards require 1U L-type HSK and GPU shroud.
GPU configuration supports only High performance Gold (HPR Gold) fan.
Every system ships with 6 hot-swap fans, with the specific type varying by CPU TDP and system configuration — mirroring how heat sink selection works. Supported fan types are listed below.
Up to six hot-swap fans- Standard (STD) fans
- High-performance Silver (HPR Silver) fans
- High-performance Gold (HPR Gold) fans
- For TDP that are 250W+ requires DLC
Planning to add a rear drive to the Dell PowerEdge R760? You'll need the High-Performance Gold fan installed, unless the CPU's TDP already sits at 270W or above.
Rear drive cages each require an added fan for adequate cooling support, plus an airflow baffle — both supplied automatically when rear drives are ordered.
Rear drives supported on the 12 LFF and the 24 SFF Chassis.
Memory-intensive workloads benefit from up to 32 DDR5 RDIMMs running at 4400 MT/s (2DPC), or up to 4800 MT/s when capped at 16 DDR5 RDIMMs (1DPC).
| DIMM Type | DIMM Rank | DIMM Capacity | Single Processor | Dual Processor | ||
|---|---|---|---|---|---|---|
| Minimum system capacity | Maximum system capacity | Minimum system capacity | Maximum system capacity | |||
| DDR5 RDIMM | Single Rank | 16 GB | 16 GB | 256 GB | 32 GB | 512 GB |
| Dual Rank | 32 GB | 32 GB | 512 GB | 64 GB | 1 TB | |
| Dual Rank | 64 GB | 64 GB | 1 TB | 128 GB | 2 TB | |
| Quad Rank | 128 GB | 128 GB | 2 TB | 256 GB | 4 TB | |
| Octa Rank | 256 GB | 256 GB | 4 TB | 512 GB | 8 TB | |
Among Dell's RAID controller options is the fPERC solution, which frees up a PCIe slot entirely by delivering a base RAID hardware controller through a compact, high-density connector to the base planar.
Both PERC11 and PERC12 controllers work with this system, and dual-controller configurations are possible by pairing an fPERC with an APERC card. See the manual's cabling section for the full range of supported setups.
| Supported storage controller cards | |
|---|---|
| Internal controllers | PERC H965i PERC H755 PERC H755N PERC H355 |
| External controllers | HBA355e PERC H965e |
| Internal Boot | Boot Optimized Storage Subsystem (BOSS-N1): HWRAID 2 x M.2 NVMe SSD USB |
| Software RAID | S160 |
| SAS Host Bus Adapters (HBA) | HBA355i |
| NOTE: PowerEdge does not support Tri-Mode, the mixing of SAS, SATA, and NVMe behind the same controller. | |
| NOTE: The Universal Backplane supports HW RAID for SAS/SATA with direct attach NVMe, and does not support HW RAID for NVMe. | |
A boot option is available on this server via 2x M.2 NVMe drives on the optional BOSS-N1 card, consistent with most Dell systems — though its physical placement shifts depending on the risers or rear drives installed.
No shutdown is needed to install the BOSS-N1 card carrier itself — powering down the system is only necessary when installing the BOSS-N1 controller card module.
| Components in kit | R760 (quantity) |
|---|---|
| BOSS-N1 controller card module | 1 |
| BOSS-N1 card carrier | 1 or 2* |
| M.2 NVMe SSD | 1 or 2* |
| M.2 NVMe SSD capacity label | 1 or 2† |
| BOSS-N1 card carrier blank | 1 |
| M3 x 0.5 x 4.5 mm screws | 1 |
| BOSS-N1 power cable for Riser 1 (220 mm) | 1 |
| BOSS-N1 signal cable for Riser 1 (170 mm) | 1 |
| BOSS-N1 power cable for x4 rear drive module (260 mm) | 1 |
| BOSS-N1 signal cable for x4 rear drive module (240 mm) | 1 |
Choosing NIC support on the Dell Gen16 R760 rack server means picking between the LOM card or the MIC card, since only one can be installed. The OCP 3.0 slot, however, remains available independently of that choice.
- 1 GbE x 2
On the Dell R760 the standard LOM is Optional and supports 2x1Gb with BCM5720 LAN controller.
Management Interface card (MIC)
- 25 GbE x 2
- 100 GbE x 2
A Dell Data Processing Unit (DPU) card requires the MIC to be installed alongside it — and because the MIC occupies the LOM ports, a LOM card can't be added at the same time.
Open Compute Project (OCP) 3.0
- 1GbE x 4
- 10 GbE x 2
- 10 GbE x 4
- 25 GbE x 2
- 25 GbE x 4
Keep in mind that an x16 card installed in the OCP 3.0 slot gets downgraded to x8, a limitation of this system board. Port support also differs: the LOM maxes out at two ports, while the OCP 3.0 slot can handle a card with up to 4 ports.
PCIe capacity reaches up to 8x Gen4 or 4x Gen5 slots across 4 riser slots, supported by 15 riser cards forming 14 unique configurations. Review the riser table below carefully, and don't hesitate to contact support if you need help finding the right setup.
| Config No. | Riser configuration | No. of Processors | PERC type supported | Rear storage possible |
|---|---|---|---|---|
| 0 | NO RSR | 2 | Front PERC | No |
| 1 | R1B+R2A+R3B+R4B | 2 | Front PERC/PERC Adapter | No |
| 2 | R1Q+R2A+R3B+R4Q | 2 | Front PERC/PERC Adapter | No |
| 3-1 | R1P+R2A+R3B+R4P (HL) | 2 | Front PERC/PERC Adapter | No |
| 3-2 | R1P+R2A+R3B+R4P (FL) | 2 | Front PERC/PERC Adapter | No |
| 4-1 | R1P+R2A+R3B+R4R (HL) | 2 | Front PERC/PERC Adapter | No |
| 5-1 | R1R+R2A+R3A+R4P (HL) | 2 | Front PERC/PERC Adapter | No |
| 5-2 | R1R+R2A+R3A+R4P (FL) | 2 | Front PERC/PERC Adapter | No |
| 6 | R2A+R4Q | 2 | Front PERC/PERC Adapter | Yes |
| 7 | R1Q+R2A+R4Q | 2 | Front PERC/PERC Adapter | Yes |
| 8 | R1B+R2A | 1 | PERC Adapter | No |
| 9 | R1Q+R2A+R4R | 1 | Front PERC | No |
| 10-1 | R1P+R2A+R4R (HL) | 1 | Front PERC | No |
| 10-2 | R1P+R2A+R4R (FL) | 1 | Front PERC | No |
| 11 | R1 Paddle + R2A + R3B + R4 Paddle | 2 | N/A | No |
| 12 | R1Q+R2A+R4Q | 2 | Front PERC/PERC Adapter | Yes |
Riser Cards
Riser 1B 2x16 (R1B)
Riser 1R 2x16 (R1R)
Riser 1R-FL 2x16 (R1R-FL)
Riser 1P 1x16 (R1P)
Riser 1P-FL 1x16 (R1P-FL)
Riser 1Q 2x16 (R1Q)
Riser 2A 2x16 (R2A)
Riser 3A 1x16 (R3A)
Riser 3A-FL 1x16 (R3A-FL)
Riser 3B 2x8 (R3B)
Riser 4P 1x16 (R4P)
Riser 4P-FL 1x16 (R4P-FL)
Riser 4B 2x16 (R4B)
Riser 4Q 2x16 (R4Q)
Riser 4R 2x16 (R4R SNAPI)
Paddle Card KitThis system handles up to two double-wide 350W accelerators or six single-wide 75W accelerators. Adding GPUs means swapping in the GPU air shroud in place of the default one, and a filler must also go in when using a single-width GPU card or leaving a riser slot empty.
All GPU/FGPA cards require 1U L-type HSK and GPU shroud.
- Double Width (DW) GPU only supported on Riser Configurations 3-2, 5-2, or 10-2
- RC 5-2: Supports DW GPU only on slot 7
- RC 10-2: Only supports a single processor configuration.
- RC 10-2: Supports DW GPU only on slot 2.
| Components | GPU FL Kit | |
|---|---|---|
| Details | Quantity | |
| Risers | Riser configuration (RC) 3-2, 5-2*, or, 10-2* | RC 3-2: R1P^ (FL) + R2A (HL) + R3B (HL) + R4P^ (FL) RC 5-2: R1R (FL) + R2A (HL) + R3A (FL) + R4P^ (FL) RC 10-2: R1P^ (FL) + R2A (HL) + R4R (FL) |
| Shroud | GPU shroud | 1 |
| Fans | HPR GOLD fan | 6 |
| Heat sinks | L-type heat sink for processor 1 and processor 2 | RC 3-2, 5-2: 2 RC 10-2: 1 |
| Cables | Power cable | 2 x 4 (8-position) or 2 x 6 + 1 x 4 (12-position + 4-sideband) |
| FL - Full Length, HL - Half Length, HPR - High Performance, RC - Riser configuration | ||
| 12 x 3.5-inch and rear drive configuration systems do not support a GPU card. | ||
Two redundant Hot-Swap AC or DC power supply units.
- 2800 W Titanium 200—240 VAC or 240 HVDC,
- 2400 W Platinum 100—240 VAC or 240 HVDC,
- 1800 W Titanium 200—240 VAC or 240 HVDC,
- 1400 W Platinum 100—240 VAC or 240 HVDC,
- 1100 W Titanium 100—240 VAC or 240 HVDC,
- 1100 W LVDC -48 — -60 VDC,
- 800 W Platinum 100—240 VAC or 240 HVDC,
- 700 W Titanium 200—240 VAC or 240 HVDC,
Width with Ears: 482.0 mm (18.97")
Width without Ears: 434.0 mm (17.08")
Height: 86.8 mm (3.41")
Length: 736.29 mm (28.98") Ear to PSU handle
Weight: A server with fully populated drives 36.1 kg (79.58 lbs)
A server without drives and PSU installed 25.1 kg (55.33 lbs)
Tarifas, todos os impostos, taxas e encargos estão incluídos
Não há custos adicionais nem pagamentos extras. Todos os envios são totalmente rastreados e segurados. Impostos, tarifas, taxas e encargos alfandegários estão incluídos em todo o mundo. Enviamos com entrega designada (DDP) via UPS, FedEx, DHL, USPS , transportadoras, redirecionadores ou a transportadora de sua escolha.
Peças de servidores e equipamentos de TI
Ver tudo
Envio
Sim, enviamos para o mundo todo. Oferecemos frete GRÁTIS ou, se você quiser entrega expressa, pode escolher o serviço e os custos de frete serão aplicados, eles serão adicionados no checkout.
Não, os impostos estão incluídos e com frete grátis.
Usamos todas as principais transportadoras e parceiros de correio locais. Você será solicitado a selecionar um método de entrega durante a finalização da compra.
Sim, oferecemos frete grátis para o seu país.
produtos
Nosso objetivo sempre é garantir que nossos clientes amem nossos produtos, mas se você precisar devolver um pedido, ficaremos felizes em ajudar. Basta nos enviar um e-mail diretamente e nós o guiaremos pelo processo.
Outro
Você pode entrar em contato conosco através da nossa página de contato! Teremos o maior prazer em ajudá-lo.
Qualquer pergunta?
Se ainda não respondemos à sua pergunta, entre em contato conosco abaixo e retornaremos o mais breve possível.